Remodeling? From Kohler to American Standard, Elkay to Franke or Moen, find low prices on bathroom sinks, kitchen faucets, indoor and outdoor lighting, and more. Discover a great selection of home improvement products at HomeCenter.com! 1-800-875-7999
Tools and Materials:
1. Sink
2. Flexible, waterproof sealant
3. Plumber's putty
4. Faucet (new or old)
5. Masking tape
6. Putty knife
7. Adjustable wrench
8. Jig saw
9. Pipe wrench
10. Tubing cutter
11. Phillips and straight screwdriver
12. Hacksaw
13. Ruler
14. Pencil
15. Drill with 1/4 and 1/2 inch bits
16. Safety glasses
Estimated Installation Time: 3 hours
Step 1
Place the sink upside down in the desired location on the counter top. The sink should be parallel to the counter's edge and far enough back to clear the overhang and the face of the underlying cabinet. Make sure that, once installed, the sink will not interfere with the existing cabinet or counter support structure.
Step 2
Using a pencil, accurately mark the location of the sink on the countertop.
Step 3
Then, remove the sink and draw another set of lines about 3/8 inches inside the first set. [This distance may differ depending on the model so be sure to check the manufacturer's instructions. Be sure to check that your lines are parallel with the front of the counter.]
Step 4
Carefully double-check these lines to make sure the rim of the sink will completely cover the hole all the way around before proceeding. The inside lines you've drawn are the cut lines for the hole into which the sink will be placed. The flange of the sink will overlap the edges of the hole to the outside set of lines.
Step 5
Drill a 1/4-inch hole approximately 1 inch inside the cut line. Enlarge the hole with a 1/2 inch bit.
Step 6
Insert the jigsaw blade into the hole and carefully cut out the sink hole while remaining just inside the lines. [Place masking tape on the heel of the jigsaw to prevent scratching the countertop. Be careful to cut the corners exactly as marked, and don't allow the blade to wander outside of the cut line. ]
Step 7
After you have completed the cutting the hole, insert the sink into the hole in the countertop to test the fit. Please note: sinks may be heavy. To prevent injuries to yourself or damage to the sink or counter, be sure to have someone help you lift the sink.
Step 8
After testing the fit, remove the sink. Make adjustments to the hole if necessary.
Step 9
Assemble and install the faucet and drain. Some sinks come ready to receive the faucet. Others do not. Follow the manufacturer's directions for your particular model for preparing the sink to receive the faucet. You may want to see our guide on How to Replace a Faucet.
Step 10
Install any mounting clips that were provided with the faucet. Do not tighten the clips at this time.
Step 11
Apply sealant, about a 1/4" bead of silicone caulk or plumber's putty to the outer bottom edge of the sink-the lip that will overhang the counter. [Be careful to apply it all the way around without missing any area. After applying the sealant you must work quickly to avoid having the sealant dry before you finish.]
Step 12
Insert the sink into the hole. Do this by holding the sink by the drain holes or the center structure. This will prevent smearing of the sealant. Align the sink carefully and press down to seat the sink in the sealant.
Step 13
From under the counter, fasten the sink in place by tightening the clips. Be sure to bend the ends of the clips away from the sink rim. The clips will pull the sink tight against the countertop.
Step 14
Use a damp cloth to remove any excess sealant from the countertop around the sink. Allow the sealant to dry according to the manufacturer's instructions.
Step 15
Connect the water supply and drain lines.
For Phone Sales please call 1-800-875-7999.
We specialize in decorative plumbing and lighting. Our top plumbing brands are Kohler, Blanco, Danze, Elkay, Franke, Kindred, and Moen. We have a warehouse full of these & other brands. Our top Lighting brands are PLC, Quoizel, & Thomas. For item availability, stock status or lead times, please email us or call 1-800-875-7999. Or else, place your order online, and we will alert you of any lead time.
We carry all products from the brands you see on our website plus we also carry more brands not listed online. For
sales assistance, please call one of our friendly Sales Representatives Toll-Free at 1-800-875-7999. We are open
from 8AM to 7PM EST Monday to Friday and from 10:30AM to 4:30PM Saturdays. Or,
contact us via email!
